SAMPLE PROJECT · Invented data, read-only · Back to xpcspine.com
XPC Spine PM3-REBUILDPaper Machine 3 Press and Dryer Section Rebuild
Help
OverviewPre-task plansPermitsInspectionsCorrective actionsIncidents and near missesStop workToolbox talksObservationsTraining and cardsLift plans

All lift plans

Lift plan RF01-1: FR-01 Remove felt roll FR-01 (top felt) ?

APPROVED Prepared by R. Okafor, Apex Rigging lift planner 2026-09-30 · approved by Jordan Pike, PM 2026-10-07

Item weight
10,173 lb
From the drawing
Source: lift_plan
Gross load calc
13,841 lb
item + 1,168 rigging + 2,500 hook block
Source: lift_plan, rigging_gear, lift_crane
Capacity at radius calc
120,000 lb
Machine room crane (60t)
Source: lift_chart, lift_crane
% of chart calc
11.5%
critical over 75%, not allowed over 90%
Source: lift_plan, lift_chart
Sling load per leg calc
5,873 lb
2 of 2 legs carrying at 60°
Source: lift_plan

Load and rigging

ItemQtyWLL lbWeight lb
FR-01 Remove felt roll FR-01 (top felt)110,173
SH-20 Screw-pin shackle, 8.5 t217,00024
SL-10 Round sling, 12 ft, vertical221,20044
SP-03 Felt roll lifting beam, 10 t, 26 ft120,0001,100
Hook block, Machine room crane (60t)12,500
Gross load13,841

Crane, path and people

Crane
Machine room crane (60t) (Overhead bridge crane, rated 120,000 lb, inspected 2026-06-23)
Set-up
n/a
Pick
Roll journals in the felt run · EL 136
Set
Felt roll rack, tending aisle · EL 100
Exclusion zone
Machine room tending-side aisle barricaded from the dryer to the laydown, basement below closed
Wind limit
n/a
Lift director
M. Alvarez, Apex Rigging lift director
Operator
Demo Mill crane operator
Rigger
K. Brandt, Northfield Millwright rigger
Signal person
S. Whitfield, Apex Rigging signal person
Schedule
RF01 Remove felt roll FR-01 (top felt), 14-Jan-27 to 14-Jan-27

Checks

PASSCrane capacity13,841 lb gross is 11.5% of 120,000 lb. Limit 90%; over 75% is a critical lift.
PASSSling angle60° from horizontal; under 45° raises sling tension sharply and under 30° is not allowed.
PASSSH-20 shackleWLL 17,000 lb against 5,873 lb per leg (2 legs carrying at 60°)
PASSSL-10 slingWLL 21,200 lb against 5,873 lb per leg (2 legs carrying at 60°)
PASSSP-03 spreader or lifting beamWLL 20,000 lb against 10,173 lb
PASSPeople namedLift director, operator, rigger and signal person named.
PASSExclusion zoneMachine room tending-side aisle barricaded from the dryer to the laydown, basement below closed

A cross-check for the lift team. The crane manufacturer's chart, the rigging ratings and the qualified lift director's sign-off govern the lift.

Lift made

Cancel

Change the plan

Load
Crane
Rigging
People and area