Lift plan RM010-1: PR-SPU Remove suction pick-up roll to the laydown
APPROVED Prepared by R. Okafor, Apex Rigging lift planner 2026-09-30 · approved by Jordan Pike, PM 2026-10-07
Item weight
38,400 lb
From the drawing
Source: lift_plan
Gross load calc
49,450 lb
item + 6,250 rigging + 4,800 hook block
Source: lift_plan, rigging_gear, lift_crane
Capacity at radius calc
116,000 lb
Mobile crane (250t), 74 ft
Source: lift_chart, lift_crane
% of chart calc
critical over 75%, not allowed over 90%
Source: lift_plan, lift_chart
Sling load per leg calc
19,200 lb
2 of 2 legs carrying at 90°
Source: lift_plan
Load and rigging
| Item | Qty | WLL lb | Weight lb |
|---|---|---|---|
| PR-SPU Remove suction pick-up roll to the laydown | 1 | 38,400 | |
| SH-01 Bolt-type shackle, 35 t | 2 | 70,000 | 190 |
| SL-06 1-3/4 in wire rope sling, 20 ft, choked on journal | 2 | 56,000 | 660 |
| SP-02 Press roll spreader beam, 60 t, 20 ft | 1 | 120,000 | 5,400 |
| Hook block, Mobile crane (250t) | 1 | 4,800 | |
| Gross load | 49,450 |
Crane, path and people
- Crane
- Mobile crane (250t) (Mobile crane, rated 500,000 lb, inspected 2026-06-23)
- Set-up
- 150 ft main boom, full counterweight · boom 150 ft · radius 74 ft
- Pick
- Suction pick-up roll journals, press section · EL 120
- Set
- North laydown cribbing · EL 100
- Exclusion zone
- Press section and north pad barricaded, roof hatch watch posted, no one under the load path
- Wind limit
- 20 mph
- Lift director
- M. Alvarez, Apex Rigging lift director
- Operator
- D. Reyes, Apex Rigging operator
- Rigger
- K. Brandt, Northfield Millwright rigger
- Signal person
- S. Whitfield, Apex Rigging signal person
- Schedule
- RM010 Remove Voith press section: rolls and felt run, 12-Jan-27 to 14-Jan-27
Checks
| PASS | Crane capacity | 49,450 lb gross is 42.6% of 116,000 lb (chart at 80 ft, 150 ft main boom, full counterweight). Limit 90%; over 75% is a critical lift. |
| PASS | Sling angle | 90° from horizontal; under 45° raises sling tension sharply and under 30° is not allowed. |
| PASS | SH-01 shackle | WLL 70,000 lb against 19,200 lb per leg (2 legs carrying at 90°) |
| PASS | SL-06 sling | WLL 56,000 lb against 19,200 lb per leg (2 legs carrying at 90°) |
| PASS | SP-02 spreader or lifting beam | WLL 120,000 lb against 38,400 lb |
| PASS | People named | Lift director, operator, rigger and signal person named. |
| PASS | Exclusion zone | Press section and north pad barricaded, roof hatch watch posted, no one under the load path |
A cross-check for the lift team. The crane manufacturer's chart, the rigging ratings and the qualified lift director's sign-off govern the lift.