SAMPLE PROJECT · Completed job · Invented data, read-only · Back to xpcspine.com
XPC Spine PM3-REBUILDPaper Machine 3 Press and Dryer Section Rebuild
Help
OverviewPre-task plansPermitsInspectionsCorrective actionsIncidents and near missesStop workToolbox talksObservationsTraining and cardsLift plans

All lift plans

Lift plan IN010-1: NPF-TS Set new tending-side press frame ?

DONE Prepared by R. Okafor, Apex Rigging lift planner 2026-08-02 · approved by Jordan Pike, PM 2026-08-15 · made, recorded by M. Alvarez, Apex Rigging lift director 2026-08-20

Item weight
30,180 lb
Certified (scale or OEM certificate)
Source: lift_plan
Gross load calc
35,480 lb
item + 500 rigging + 4,800 hook block
Source: lift_plan, rigging_gear, lift_crane
Capacity at radius calc
116,000 lb
Mobile crane (250t), 78 ft
Source: lift_chart, lift_crane
% of chart calc
30.6%
critical over 75%, not allowed over 90%
Source: lift_plan, lift_chart
Sling load per leg calc
17,424 lb
2 of 2 legs carrying at 60°
Source: lift_plan

Load and rigging

ItemQtyWLL lbWeight lb
NPF-TS Set new tending-side press frame130,180
SH-10 Bolt-type shackle, 17 t234,00080
SL-05 1-1/2 in wire rope sling, 16 ft, choked on journal242,000420
Hook block, Mobile crane (250t)14,800
Gross load35,480

Crane, path and people

Crane
Mobile crane (250t) (Mobile crane, rated 500,000 lb, inspected 2026-04-25)
Set-up
150 ft main boom, full counterweight · boom 150 ft · radius 78 ft
Pick
North laydown · EL 100
Set
Press sole plates · EL 120
Exclusion zone
Press section and north pad barricaded, roof hatch watch posted, no one under the load path
Wind limit
20 mph
Lift director
M. Alvarez, Apex Rigging lift director
Operator
D. Reyes, Apex Rigging operator
Rigger
K. Brandt, Northfield Millwright rigger
Signal person
S. Whitfield, Apex Rigging signal person
Schedule
IN010 Set new press frames and sole plates, 17-Aug-26 to 20-Aug-26
Notes
Certified weight from the OEM shipping papers.

Checks

PASSCrane capacity35,480 lb gross is 30.6% of 116,000 lb (chart at 80 ft, 150 ft main boom, full counterweight). Limit 90%; over 75% is a critical lift.
PASSSling angle60° from horizontal; under 45° raises sling tension sharply and under 30° is not allowed.
PASSSH-10 shackleWLL 34,000 lb against 17,424 lb per leg (2 legs carrying at 60°)
PASSSL-05 slingWLL 42,000 lb against 17,424 lb per leg (2 legs carrying at 60°)
PASSPeople namedLift director, operator, rigger and signal person named.
PASSExclusion zonePress section and north pad barricaded, roof hatch watch posted, no one under the load path

A cross-check for the lift team. The crane manufacturer's chart, the rigging ratings and the qualified lift director's sign-off govern the lift.