SAMPLE PROJECT · Completed job · Invented data, read-only · Back to xpcspine.com
XPC Spine PM3-REBUILDPaper Machine 3 Press and Dryer Section Rebuild
Help
OverviewPre-task plansPermitsInspectionsCorrective actionsIncidents and near missesStop workToolbox talksObservationsTraining and cardsLift plans

Safety control center ?

Safety comes first on this project. Every pre-task plan, permit, inspection, corrective action, incident, stop-work and toolbox talk is recorded here with who entered it. Anyone may stop work. Safety reports stay open to every field supervisor at all times.

Leading indicators last 30 days, and open now

Observations
0
Source: safety_observation
Near misses reported
0
reporting them is good
Source: safety_incident
Pre-task plans
0
Source: safety_pretask
Toolbox talks
0
0 attendances
Source: safety_toolbox
Inspections done
0
Source: safety_inspection
Inspections overdue now
0
Source: safety_inspection_item
Permits open now
0
Source: safety_permit
Permits expired, not closed
0
Source: safety_permit
Corrective actions open
0
0 overdue
Source: safety_action
Stop-work events
0
0 still stopped
Source: safety_stop_work
Supervision trained
100%
calc complete ÷ people required
Source: training_attempt, safety_card, site_person

Lagging indicators project to date

Hours on daily logs
68,559
Source: daily_log crew hours
Recordable cases
0
Source: safety_incident
TRIR calc
0.00
recordables × 200,000 ÷ hours
Source: safety_incident, daily_log
DART rate calc
0.00
0 days-away or restricted × 200,000 ÷ hours
Source: safety_incident, daily_log
Lost-time cases
0
Source: safety_incident
First aid cases
1
Source: safety_incident
Days since last recordable
None yet
no recordable case on this project
Source: safety_incident

Work stopped now

No work is stopped.

Source: safety_stop_work

Permits expired but not closed

None.

Source: safety_permit

Corrective actions overdue

None overdue.

Source: safety_action

Inspections overdue or failed

All current.

Source: safety_inspection_item, safety_inspection

Training overdue

No one overdue.

Source: membership, site_person, training_attempt, safety_card, training_rule

Latest incidents and near misses

INC-003 2026-08-18 NEAR MISS Residual condensate sprayed from a flange when the bolts were cracked. The line was...

INC-002 2026-08-15 FIRST AID A millwright pinched a finger between the spreader beam and a dryer journal while...

INC-001 2026-08-10 NEAR MISS A shackle pin dropped from the blow box level into the barricaded tending aisle while...

Source: safety_incident, safety_action
Source: safety_observation, safety_pretask, safety_toolbox, safety_inspection, safety_permit, safety_action, safety_stop_work, safety_incident, daily_log